Skip to content
DCC Pros

Modular cooling

ENVIROFREEZE®: build cooling in steps, not all at once

Factory-built, natural refrigerant cooling skids. Start with what the first hall needs and add capacity as the load arrives.

What it is

A packaged cooling plant, built and tested before it reaches your site

ENVIROFREEZE® is a line of packaged chiller systems built by Prairie HVAC/R, an IR Pros operating company. Each skid arrives with compressors, heat exchangers, piping, electrical, and controls already assembled and tested.

For a data center, that means capacity follows actual IT load. You add a skid when tenants sign and racks fill, and fabrication happens in parallel with site work.

Rendering of an ENVIROFREEZE packaged skid with compressors, heat exchanger, and control panels

Why modular works for data centers

Designed around how data centers actually fill

All natural refrigerants

ENVIROFREEZE® systems for data centers run on natural refrigerants, with no Freon or HFO phase-down to plan around.

Low critical charge

Packaged skids are designed to hold a small refrigerant charge, kept in the machinery and away from the data hall.

Full heat recovery capability

Rejected heat can be captured for domestic heating, geothermal loops, or a neighboring facility.

Free cooling

When outdoor conditions allow, the system can cool without running compressors. Economizers are available as an option.

Heat rejection to suit the site

Air-cooled, evaporative, and adiabatic options, selected for your climate and water constraints.

Low maintenance by design

Factory-built packages are simpler to maintain than field-erected systems, with service access planned in.

Two formats

Skids or containers

Rendering of an ENVIROFREEZE packaged skid with compressors, heat exchanger, and control panels

Packaged skids

Open skids for machine rooms and central plants. Added in 500-ton increments and scaled to 5,000 tons and beyond.

Rendering of a containerized ENVIROFREEZE unit with heat rejection equipment on the roof

Containerized units

A complete plant in a container, with up to 250 tons per unit. Set it on a pad, connect it, and start it up.

How it goes in

One platform, start to finish

Built by Prairie HVAC/R, then installed, insulated, commissioned, and serviced by IR Pros operating companies.

  1. Size the first step

    We size the first skids to the load you have signed, not the load on the long-range forecast.

  2. Build and test in the factory

    Skids are fabricated, wired, and tested at Prairie HVAC/R while your site work proceeds.

  3. Set and connect

    Skids ship to site, are set by crane, and are piped, wired, and insulated by IR Pros crews.

  4. Commission

    The system is tested against the design and handed over with documentation and operator training.

  5. Add skids as load grows

    When tenants sign and racks fill, the next skid goes in beside the first.

  6. Service

    Remote monitoring and field service from the IR Pros network for the life of the plant.

Remote controls

See the whole plant from anywhere

Every ENVIROFREEZE® system ships with remote controls, so your operators and our service teams can see what the plant is doing and act before a small issue becomes an outage.

  • Remote access to the full system
  • Detailed system operation schematics
  • Compressor pages that drill down into diagnostics
  • Scheduling to match operation to demand
  • Alarms sent by email as they happen
  • Trending for remote troubleshooting
  • Integration with facility HVAC controls

Proven beyond the data hall

Where ENVIROFREEZE® runs today

The same packaged platform serves facilities that cannot afford to lose cooling.

  • Data centers
  • Process cooling
  • Cold storage and production
  • Arenas and curling clubs
  • Mining
Aerial view of the Prairie HVAC/R shop and yard in Manitoba

Prairie HVAC/R, near Winnipeg, Manitoba, where ENVIROFREEZE® is built.

ENVIROFREEZE® in pictures

  • Green containerized ENVIROFREEZE unit with insulated piping along its side and heat rejection equipment on the roof
  • Installed ENVIROFREEZE container with insulated piping running to the building it serves
  • End view of an ENVIROFREEZE container beside a building, with piping and equipment on top
  • ENVIROFREEZE container on a gravel pad behind the building it serves
  • ENVIROFREEZE skid being built in the Prairie HVAC/R shop, with compressors, pumps, and plate heat exchangers
  • Pump end of an ENVIROFREEZE skid in the shop, with twin red pumps and a plate heat exchanger
  • Compressor side of a finished ENVIROFREEZE skid in the shop
  • Compressor control panels and drive cabinets wired on an ENVIROFREEZE skid
  • Green containerized ENVIROFREEZE unit installed beside a building, with heat rejection equipment on top
  • Side view of an installed containerized ENVIROFREEZE unit on a gravel pad
  • Cutaway rendering showing compressors, piping, and controls inside a containerized ENVIROFREEZE unit
  • ENVIROFREEZE skid installed in a machine room with insulated piping
  • Row of control panels on an ENVIROFREEZE skid in a machine room
  • Rendering of an ENVIROFREEZE skid with twin compressors and a plate heat exchanger
  • Rendering of a long ENVIROFREEZE skid with control panels at one end
  • Rendering of an ENVIROFREEZE skid viewed from the control panel side
  • Rendering of an ENVIROFREEZE skid with two compressors mounted over a vessel

Planning a phased build?

Tell us your first-phase load and your growth plan. We will show you how the skids would go in.